• 1 x Alchemy Bottle Pump
• 7.5ml syrup per pump
• Easy To Use
• Portion Control
• Washable

When you first open the Alchemy syrup bottles there is a priming procedure that needs to be followed to ensure that the installation of the measured dose pumps remains mess free.

As you insert the pump into the syrup, you should depress the pump approximately one and a half times: this fills the pump chamber and ensures that when the entire pump is pressed down into the correct operating position that there is no overflow of syrup that can result in sticky fingers!

Cleaning Instructions

• Fill a clean container with hot soapy water, place the pumps dip tube into the soapy water and depress the pump rapidly (15-20 times) flushing the soapy liquid through the pump.
• Fill a separate container with clean hot water and repeat the flushing process.
• After washing, it is important to pump out all the excess water, and water introduced into the product from a wet pump could lead to spoilage.
• When re-installing the pump, repeat the priming directions listed above.

Each pump dispenses 7.5ml of Alchemy syrup.